PerfectLayer3D

Elegoo

Elegoo Mars 5

LCD 4K resin printer. Build volume: 143.43 × 89.6 × 150 mm.

Assessed from documentation Updated on October 4, 2026

How to recognize it: Check the full model name “Mars 5” on the label or in device information. Suffixes and revisions identify different models; check the source before selecting parts.

Start the wizard with this printer Compare printer

Technical specifications

Manufacturer specifications for the listed configuration. Notes identify accessories, measurement conditions and calculated values.

Technology and structure2
Technology MSLA
Build area shape Rectangular
Build area and volume4
Build area X 143.43 mm
Build area Y 89.6 mm
Build area Z 150 mm
Build volume 1.9277 L

Calculated from nominal X × Y × Z dimensions.
Resolution8
Minimum layer thickness 0.01 mm
Maximum layer thickness 0.2 mm
Exposure LCD diagonal 6.6 in
LCD resolution X 4,096 px
LCD resolution Y 2,560 px
XY pixel pitch X 35 µm
XY pixel pitch Y 35 µm
UV wavelength 405 nm
Features1
Automatic leveling Yes
Connectivity3
Control display diagonal 3.5 in
Connectivity USB
Listed slicers CHITUBOX, Tango
Dimensions and weight4
Machine width 230 mm
Machine depth 230 mm
Machine height 433.5 mm
Net weight 6.6 kg

Technical sources: Mars 5 — documentazione ufficiale · Mars 5 — specifiche tecniche ufficiali

Undocumented specifications (22)
  • Enclosed as standard: Not documented
  • Installed toolheads / extruders: Not documented
  • Chamber heating: Not documented
  • Maximum chamber temperature: Not documented
  • Maximum resin heating temperature: Not documented
  • Advertised maximum vertical speed: Not documented
  • Power loss recovery: Not documented
  • Camera: Not documented
  • Air filtration: Not documented
  • Control display: Not documented
  • Firmware: Not documented
  • Internal storage: Not documented
  • Manufacturer-listed materials: Not documented
  • Rated power: Not documented
  • Power supply: Not documented
  • Advertised noise: Not documented
  • Leveling method: Not documented
  • Light source: Not documented
  • Release film: Not documented
  • Automatic resin feeding: Not documented
  • Resin vat capacity: Not documented
  • Advertised Z accuracy: Not documented

No published compatibility for this printer.

Related guides

General guides help identify print defects. Follow the manual for your exact model and variant for disassembly, maintenance and calibration.

Official documentation

Manuals and guides published by Elegoo. Links go to the manufacturer’s site; we consulted them on the date shown.

Support page
User manual
Troubleshooting
Parts replacement
Firmware and software
Safety
Technical specifications

Sources