Browser storage is unavailable: your choices will not be saved on this device.
You are offline: you are viewing the pages saved on this device.
Anycubic
Anycubic Kobra X
FDM filament printer. Build volume: 260 × 260 × 260 mm.
Assessed from documentation Updated on October 4, 2026
How to recognize it: Check the full model name “Kobra X” on the label or in device information. Suffixes and revisions identify different models; check the source before selecting parts.
Technical specifications
Manufacturer specifications for the listed configuration. Notes identify accessories, measurement conditions and calculated values.
Technology and structure2
| Technology | FDM |
|---|---|
| Build area shape | Rectangular |
Build area and volume4
| Build area X | 260 mm |
|---|---|
| Build area Y | 260 mm |
| Build area Z | 260 mm |
| Build volume | 17.576 L Calculated from nominal X × Y × Z dimensions. |
Hardware6
| Enclosed as standard | No |
|---|---|
| Extruder type | Direct drive |
| Standard nozzle | 0.4 mm |
| Available nozzle diameters | 0.25, 0.4, 0.6, 0.8 mm |
| Nozzle material | Hardened steel |
| Build plate | PEI spring steel |
Temperatures2
| Maximum hotend temperature | 300 °C |
|---|---|
| Maximum bed temperature | 100 °C |
Speed and performance3
| Advertised maximum print speed | 600 mm/s |
|---|---|
| Advertised typical print speed | 300 mm/s |
| Maximum acceleration | 20,000 mm/s² |
Features6
| Multicolor system | Native 4-color + optional ACE 2 Pro |
|---|---|
| Colors with documented configuration | 19 Four native colors; 19 requires ACE 2 Pro expansion. |
| Automatic leveling | Yes |
| Filament runout sensor | Yes |
| Power loss recovery | Yes |
| Camera | Built in |
Connectivity4
| Control display diagonal | 3.5 in |
|---|---|
| Control display | Capacitive touchscreen |
| Listed slicers | Anycubic Slicer Next |
| Firmware | Kobra OS |
Materials1
| Manufacturer-listed materials | PLA, PETG, TPU, PVA, PLA-CF, PETG-CF, ASA |
|---|
Dimensions and weight4
| Machine width | 560 mm |
|---|---|
| Machine depth | 540 mm |
| Machine height | 330 mm |
| Net weight | 9.5 kg |
Power1
| Advertised noise | 48 dB Advertised limit; acoustic test conditions are not standardized. |
|---|
Technical sources: Kobra X — documentazione ufficiale
Undocumented specifications (19)
- Kinematics: Not documented
- Shared dual-nozzle area X: Not documented
- Shared dual-nozzle area Y: Not documented
- Shared dual-nozzle area Z: Not documented
- Installed toolheads / extruders: Not documented
- Filament diameter: Not documented
- Chamber heating: Not documented
- Maximum chamber temperature: Not documented
- Maximum travel speed: Not documented
- Maximum volumetric flow: Not documented
- Minimum layer thickness: Not documented
- Maximum layer thickness: Not documented
- Air filtration: Not documented
- Connectivity: Not documented
- Internal storage: Not documented
- Rated power: Not documented
- Power supply: Not documented
- Leveling method: Not documented
- Advertised Z accuracy: Not documented
No published compatibility for this printer.
Related guides
General guides help identify print defects. Follow the manual for your exact model and variant for disassembly, maintenance and calibration.
- First layer not sticking: causes and checks
How to recognise a first layer that is too high, too squished or uneven and fix it in order: plate cleaning, slicer profile, leveling, Z offset. Based on official guidance from Bambu Lab, Prusa, Creality, Elegoo and Anycubic.
- Warping: corners lifting off the bed with ABS, ASA, PETG and PLA
Why corners curl and how to reduce it: plate cleaning, drafts, enclosure, bed temperature, brim and ears, cooling and glue. Based on official guidance from Bambu Lab and Prusa and on user experience.
- Clogged nozzle and under-extrusion: find where the blockage is and fix it
How to tell a blockage in the PTFE tube, the extruder or the hotend apart, when to use the needle and cold pull, how to recognise heat creep, and when replacing the nozzle, PTFE tube or gears is actually justified.
- Wet filament: recognise it, dry it and store it
Symptoms of filament that has absorbed moisture, the most sensitive materials, how to dry following Bambu Lab and Prusa official tables without damaging spool or filament, and how to keep it dry.
- Stringing and oozing: how to get rid of filament strings and blobs
How to recognise stringing and oozing, the main causes (wet filament, temperature, retraction, travel moves, nozzle) and the checks to do in order, with official guidance from Prusa, Bambu Lab, Creality and Elegoo.
- Layer shifting: causes and checks in order
Why layers shift along X or Y and how to find the cause: obstructions, collisions with curled parts, belts, pulleys, speed, electronics cooling and motors, with official guidance from Prusa, Bambu Lab, Creality, Elegoo and Anycubic.
- Ringing and ghosting: getting rid of ripples on FDM print walls
What ringing (or ghosting) is, why it appears after corners and lettering, and how to fix it in order: printer surface, loose parts, belts, lubrication, vibration calibration (input shaping), speed and acceleration.
Dates and news
-
Anycubic opens Kobra X deposits
In its manufacturer release, Anycubic confirmed Kobra X deposits from 26 December 2025: a US$10 deposit qualified for a US$30 discount on the final purchase. The deposit reserved access to the campaign and did not mean immediate shipping.
Sources: Anycubic introduces Kobra X high-speed multi-color 3D printer with early bird campaign (3DPrinting.com) · Anycubic — Kobra X deposits (manufacturer press release) (Anycubic via PR Newswire)
Official documentation
Manuals and guides published by Anycubic. Links go to the manufacturer’s site; we consulted them on the date shown.
- Support page
-
- Anycubic support wiki hub — English, accessed on October 5, 2026
- User manual
-
- User manual (PDF, English) — English, accessed on October 5, 2026
- User manual (PDF, Italian) — Italian, accessed on October 5, 2026
- Quick start guide
-
- Quick start guide — English, accessed on October 5, 2026
- Maintenance
-
- Maintenance recommendations — English, accessed on October 5, 2026
- Cleaning clogged nozzles — English, accessed on October 5, 2026
- Troubleshooting
-
- Abnormal print head clogging — English, accessed on October 5, 2026
- No extrusion / printing in the air — English, accessed on October 5, 2026
- Model not sticking to the bed — English, accessed on October 5, 2026
- Nozzle scratching the bed during printing — English, accessed on October 5, 2026
- Fixing layer shifting — English, accessed on October 5, 2026
- Parts replacement
-
- Quick-release nozzle replacement — English, accessed on October 5, 2026
- X-axis belt replacement — English, accessed on October 5, 2026
- ACE GEN2 upper channel replacement — English, accessed on October 5, 2026
- Purge wiper replacement — English, accessed on October 5, 2026
- Firmware and software
-
- Firmware update guide and changelog — English, accessed on October 5, 2026
- Technical specifications
-
- FAQ and specifications — English, accessed on October 5, 2026
- Introduction to the main components — English, accessed on October 5, 2026
- Official documentation — English, accessed on October 5, 2026
Sources
- Kobra X — official documentation — Anycubic, accessed on October 5, 2026