Browser storage is unavailable: your choices will not be saved on this device.
You are offline: you are viewing the pages saved on this device.
Bambu Lab
Bambu Lab P2S
New-generation CoreXY with a 256 × 256 × 256 mm build volume, 5-inch touchscreen and quick-swap nozzle. Nozzle up to 300 °C and bed up to 110 °C; do not assume P1S part compatibility.
Assessed from documentation Updated on October 4, 2026
How to recognize it: Check the full model name on the label or in device information. Combo denotes an AMS bundle: check installed accessories and any modifications separately.
Technical specifications
Manufacturer specifications for the listed configuration. Notes identify accessories, measurement conditions and calculated values.
Technology and structure2
| Technology | FDM |
|---|---|
| Build area shape | Rectangular |
Build area and volume4
| Build area X | 256 mm |
|---|---|
| Build area Y | 256 mm |
| Build area Z | 256 mm |
| Build volume | 16.7772 L Calculated from nominal X × Y × Z dimensions. |
Hardware4
| Enclosed as standard | Yes |
|---|---|
| Extruder type | Direct drive |
| Standard nozzle | 0.4 mm |
| Available nozzle diameters | 0.2, 0.4, 0.6, 0.8 mm |
Temperatures2
| Maximum hotend temperature | 300 °C |
|---|---|
| Maximum bed temperature | 110 °C |
Features4
| Filament runout sensor | Yes |
|---|---|
| Power loss recovery | Yes |
| Camera | Built in |
| Air filtration | Activated carbon |
Connectivity1
| Control display diagonal | 5 in |
|---|
Technical sources: P2S — presentazione e specifiche
Undocumented specifications (35)
- Kinematics: Not documented
- Shared dual-nozzle area X: Not documented
- Shared dual-nozzle area Y: Not documented
- Shared dual-nozzle area Z: Not documented
- Installed toolheads / extruders: Not documented
- Filament diameter: Not documented
- Nozzle material: Not documented
- Build plate: Not documented
- Chamber heating: Not documented
- Maximum chamber temperature: Not documented
- Advertised maximum print speed: Not documented
- Advertised typical print speed: Not documented
- Maximum travel speed: Not documented
- Maximum acceleration: Not documented
- Maximum volumetric flow: Not documented
- Minimum layer thickness: Not documented
- Maximum layer thickness: Not documented
- Multicolor system: Not documented
- Colors with documented configuration: Not documented
- Automatic leveling: Not documented
- Control display: Not documented
- Connectivity: Not documented
- Listed slicers: Not documented
- Firmware: Not documented
- Internal storage: Not documented
- Manufacturer-listed materials: Not documented
- Machine width: Not documented
- Machine depth: Not documented
- Machine height: Not documented
- Net weight: Not documented
- Rated power: Not documented
- Power supply: Not documented
- Advertised noise: Not documented
- Leveling method: Not documented
- Advertised Z accuracy: Not documented
No published compatibility for this printer.
Related guides
General guides help identify print defects. Follow the manual for your exact model and variant for disassembly, maintenance and calibration.
- First layer not sticking: causes and checks
How to recognise a first layer that is too high, too squished or uneven and fix it in order: plate cleaning, slicer profile, leveling, Z offset. Based on official guidance from Bambu Lab, Prusa, Creality, Elegoo and Anycubic.
- Warping: corners lifting off the bed with ABS, ASA, PETG and PLA
Why corners curl and how to reduce it: plate cleaning, drafts, enclosure, bed temperature, brim and ears, cooling and glue. Based on official guidance from Bambu Lab and Prusa and on user experience.
- Clogged nozzle and under-extrusion: find where the blockage is and fix it
How to tell a blockage in the PTFE tube, the extruder or the hotend apart, when to use the needle and cold pull, how to recognise heat creep, and when replacing the nozzle, PTFE tube or gears is actually justified.
- Wet filament: recognise it, dry it and store it
Symptoms of filament that has absorbed moisture, the most sensitive materials, how to dry following Bambu Lab and Prusa official tables without damaging spool or filament, and how to keep it dry.
- Stringing and oozing: how to get rid of filament strings and blobs
How to recognise stringing and oozing, the main causes (wet filament, temperature, retraction, travel moves, nozzle) and the checks to do in order, with official guidance from Prusa, Bambu Lab, Creality and Elegoo.
- Layer shifting: causes and checks in order
Why layers shift along X or Y and how to find the cause: obstructions, collisions with curled parts, belts, pulleys, speed, electronics cooling and motors, with official guidance from Prusa, Bambu Lab, Creality, Elegoo and Anycubic.
- Ringing and ghosting: getting rid of ripples on FDM print walls
What ringing (or ghosting) is, why it appears after corners and lettering, and how to fix it in order: printer surface, loose parts, belts, lubrication, vibration calibration (input shaping), speed and acceleration.
Dates and news
-
Bambu Lab introduces the P2S
Bambu Lab introduced the P2S, a fully re-engineered successor to the P1 series. Stated European prices were €519 for the P2S and €749 for the P2S Combo, tax included.
Sources: P2S — launch and specifications (Bambu Lab)
Official documentation
Manuals and guides published by Bambu Lab. Links go to the manufacturer’s site; we consulted them on the date shown.
- Support page
-
- Official wiki hub page — English, accessed on October 5, 2026
- Official documentation page (PDF download) — multiple languages, accessed on October 5, 2026
- User manual
-
- User manual (3D Printing User Manual) — English, accessed on October 5, 2026
- Quick start guide
-
- Quick start guide (Italian) — Italian, accessed on October 5, 2026
- Quick start guide (English) — English, accessed on October 5, 2026
- P2S AMS Combo — quick start guide (Italian) — Italian, accessed on October 5, 2026
- Maintenance
-
- Cleaning and periodic maintenance recommendations — English, accessed on October 5, 2026
- XYZ axis cleaning and lubrication — English, accessed on October 5, 2026
- XY and Z belt tensioning — English, accessed on October 5, 2026
- XY axis idler pulley lubrication — English, accessed on October 5, 2026
- Troubleshooting
-
- Clog troubleshooting — English, accessed on October 5, 2026
- Nozzle unclogging procedure (needle and cold pull) — English, accessed on October 5, 2026
- First layer optimization — English, accessed on October 5, 2026
- Parts replacement
-
- Hotend and silicone sock replacement — English, accessed on October 5, 2026
- XY belt replacement — English, accessed on October 5, 2026
- Air filter and filter cover replacement — English, accessed on October 5, 2026
- Firmware and software
-
- Firmware version history — English, accessed on October 5, 2026
- Technical specifications
-
- Technical specifications — English, accessed on October 5, 2026
- Launch and specifications — English, accessed on October 5, 2026
- FAQ (specifications, spare parts compatibility, usage) — English, accessed on October 5, 2026
Sources
- P2S — launch and specifications — Bambu Lab, accessed on October 5, 2026