Browser storage is unavailable: your choices will not be saved on this device.
You are offline: you are viewing the pages saved on this device.
Elegoo
Elegoo OrangeStorm Giga
FDM filament printer. Build volume: 800 × 800 × 1000 mm.
Assessed from documentation Updated on October 4, 2026
How to recognize it: Check the full model name “OrangeStorm Giga” on the label or in device information. Suffixes and revisions identify different models; check the source before selecting parts.
Technical specifications
Manufacturer specifications for the listed configuration. Notes identify accessories, measurement conditions and calculated values.
Technology and structure2
| Technology | FDM |
|---|---|
| Build area shape | Rectangular |
Build area and volume4
| Build area X | 800 mm |
|---|---|
| Build area Y | 800 mm |
| Build area Z | 1,000 mm |
| Build volume | 640 L Calculated from nominal X × Y × Z dimensions. |
Hardware6
| Installed toolheads / extruders | 1 Up to three optional additional toolheads for separate copies. |
|---|---|
| Extruder type | Direct drive |
| Standard nozzle | 0.6 mm |
| Available nozzle diameters | 0.4, 0.6, 0.8, 1 mm |
| Nozzle material | Brass |
| Build plate | Four 410 × 410 mm PEI platforms |
Temperatures2
| Maximum hotend temperature | 300 °C |
|---|---|
| Maximum bed temperature | 100 °C |
Speed and performance2
| Advertised maximum print speed | 300 mm/s |
|---|---|
| Advertised typical print speed | 150 mm/s |
Features1
| Automatic leveling | Yes |
|---|
Connectivity2
| Control display diagonal | 10.1 in |
|---|---|
| Listed slicers | Elegoo Cura |
Power1
| Rated power | 1,530 W Plus 100 W per additional toolhead. |
|---|
Technical sources: OrangeStorm Giga — documentazione ufficiale · OrangeStorm Giga — specifiche tecniche ufficiali
Undocumented specifications (32)
- Kinematics: Not documented
- Shared dual-nozzle area X: Not documented
- Shared dual-nozzle area Y: Not documented
- Shared dual-nozzle area Z: Not documented
- Enclosed as standard: Not documented
- Filament diameter: Not documented
- Chamber heating: Not documented
- Maximum chamber temperature: Not documented
- Maximum travel speed: Not documented
- Maximum acceleration: Not documented
- Maximum volumetric flow: Not documented
- Minimum layer thickness: Not documented
- Maximum layer thickness: Not documented
- Multicolor system: Not documented
- Colors with documented configuration: Not documented
- Filament runout sensor: Not documented
- Power loss recovery: Not documented
- Camera: Not documented
- Air filtration: Not documented
- Control display: Not documented
- Connectivity: Not documented
- Firmware: Not documented
- Internal storage: Not documented
- Manufacturer-listed materials: Not documented
- Machine width: Not documented
- Machine depth: Not documented
- Machine height: Not documented
- Net weight: Not documented
- Power supply: Not documented
- Advertised noise: Not documented
- Leveling method: Not documented
- Advertised Z accuracy: Not documented
No published compatibility for this printer.
Related guides
General guides help identify print defects. Follow the manual for your exact model and variant for disassembly, maintenance and calibration.
- First layer not sticking: causes and checks
How to recognise a first layer that is too high, too squished or uneven and fix it in order: plate cleaning, slicer profile, leveling, Z offset. Based on official guidance from Bambu Lab, Prusa, Creality, Elegoo and Anycubic.
- Warping: corners lifting off the bed with ABS, ASA, PETG and PLA
Why corners curl and how to reduce it: plate cleaning, drafts, enclosure, bed temperature, brim and ears, cooling and glue. Based on official guidance from Bambu Lab and Prusa and on user experience.
- Clogged nozzle and under-extrusion: find where the blockage is and fix it
How to tell a blockage in the PTFE tube, the extruder or the hotend apart, when to use the needle and cold pull, how to recognise heat creep, and when replacing the nozzle, PTFE tube or gears is actually justified.
- Wet filament: recognise it, dry it and store it
Symptoms of filament that has absorbed moisture, the most sensitive materials, how to dry following Bambu Lab and Prusa official tables without damaging spool or filament, and how to keep it dry.
- Stringing and oozing: how to get rid of filament strings and blobs
How to recognise stringing and oozing, the main causes (wet filament, temperature, retraction, travel moves, nozzle) and the checks to do in order, with official guidance from Prusa, Bambu Lab, Creality and Elegoo.
- Layer shifting: causes and checks in order
Why layers shift along X or Y and how to find the cause: obstructions, collisions with curled parts, belts, pulleys, speed, electronics cooling and motors, with official guidance from Prusa, Bambu Lab, Creality, Elegoo and Anycubic.
- Ringing and ghosting: getting rid of ripples on FDM print walls
What ringing (or ghosting) is, why it appears after corners and lettering, and how to fix it in order: printer surface, loose parts, belts, lubrication, vibration calibration (input shaping), speed and acceleration.
Official documentation
Manuals and guides published by Elegoo. Links go to the manufacturer’s site; we consulted them on the date shown.
- Support page
-
- Official wiki hub (support) — English, accessed on October 5, 2026
- User manual
-
- User manual (single printhead, V1.5) — English, accessed on October 5, 2026
- Assembly
-
- Multi-printhead installation instructions (V1.1) — English, accessed on October 5, 2026
- Maintenance
-
- Routine maintenance — English, accessed on October 5, 2026
- Troubleshooting
-
- Defective first layer (troubleshooting) — English, accessed on October 5, 2026
- Extruder keeps moving down (proximity sensor) — English, accessed on October 5, 2026
- Z axis not moving correctly — English, accessed on October 5, 2026
- Won't power on / black touchscreen — English, accessed on October 5, 2026
- TMC stepper_x error (driver overheating) — English, accessed on October 5, 2026
- Parts replacement
-
- Nozzle replacement — English, accessed on October 5, 2026
- Nozzle assembly replacement (B0G0P1) — English, accessed on October 5, 2026
- Extruder gearbox and PTFE tube replacement (B0G0H1) — English, accessed on October 5, 2026
- Heat break cooling fan replacement — English, accessed on October 5, 2026
- X-axis belt replacement (B0G0F1) — English, accessed on October 5, 2026
- Y-axis belts replacement — English, accessed on October 5, 2026
- Firmware and software
-
- Firmware update (mainboard and touchscreen) — English, accessed on October 5, 2026
- Elegoo, 12 models — ELEGOO download center (firmware and software) — English, accessed on October 5, 2026
- Technical specifications
-
- Official technical specifications — English, accessed on October 5, 2026
Sources
- OrangeStorm Giga — official documentation — Elegoo, accessed on October 4, 2026
- OrangeStorm Giga — official technical specifications — Elegoo, accessed on October 5, 2026