Browser storage is unavailable: your choices will not be saved on this device.
You are offline: you are viewing the pages saved on this device.
Flashforge
Flashforge AD5X
FDM filament printer. Build volume: 220 × 220 × 220 mm. IFS multicolor system.
Assessed from documentation Updated on October 4, 2026
How to recognize it: Check the full model name “AD5X” on the label or in device information. Suffixes and revisions identify different models; check the source before selecting parts.
Technical specifications
Manufacturer specifications for the listed configuration. Notes identify accessories, measurement conditions and calculated values.
Technology and structure3
| Technology | FDM |
|---|---|
| Kinematics | CoreXY |
| Build area shape | Rectangular |
Build area and volume4
| Build area X | 220 mm |
|---|---|
| Build area Y | 220 mm |
| Build area Z | 220 mm |
| Build volume | 10.648 L Calculated from nominal X × Y × Z dimensions. |
Hardware5
| Enclosed as standard | No |
|---|---|
| Installed toolheads / extruders | 1 |
| Standard nozzle | 0.4 mm |
| Available nozzle diameters | 0.25, 0.4, 0.6, 0.8 mm |
| Build plate | PEI flexible steel |
Temperatures2
| Maximum hotend temperature | 300 °C |
|---|---|
| Maximum bed temperature | 110 °C |
Speed and performance3
| Advertised maximum print speed | 300 mm/s |
|---|---|
| Maximum travel speed | 600 mm/s |
| Maximum acceleration | 20,000 mm/s² |
Resolution2
| Minimum layer thickness | 0.1 mm |
|---|---|
| Maximum layer thickness | 0.4 mm |
Features6
| Multicolor system | IFS |
|---|---|
| Colors with documented configuration | 4 |
| Automatic leveling | Yes |
| Filament runout sensor | Yes |
| Power loss recovery | Yes |
| Camera | Optional |
Connectivity4
| Control display diagonal | 4.3 in |
|---|---|
| Control display | Color touchscreen |
| Connectivity | USB, Ethernet, Wi-Fi |
| Listed slicers | Orca-Flashforge, OrcaSlicer |
Materials1
| Manufacturer-listed materials | PETG, PLA, TPU-95A, TPU-64D, TPU-75D, PLA-CF, PETG-CF TPU-95A recommended for single-color printing. |
|---|
Technical sources: AD5X — documentazione ufficiale
Undocumented specifications (22)
- Shared dual-nozzle area X: Not documented
- Shared dual-nozzle area Y: Not documented
- Shared dual-nozzle area Z: Not documented
- Extruder type: Not documented
- Filament diameter: Not documented
- Nozzle material: Not documented
- Chamber heating: Not documented
- Maximum chamber temperature: Not documented
- Advertised typical print speed: Not documented
- Maximum volumetric flow: Not documented
- Air filtration: Not documented
- Firmware: Not documented
- Internal storage: Not documented
- Machine width: Not documented
- Machine depth: Not documented
- Machine height: Not documented
- Net weight: Not documented
- Rated power: Not documented
- Power supply: Not documented
- Advertised noise: Not documented
- Leveling method: Not documented
- Advertised Z accuracy: Not documented
No published compatibility for this printer.
Accessories with verified compatibility
| Accessory | Printer variant | Status |
|---|---|---|
| Flashforge original hotend assembly for AD5X AD5X | AD5X | Verified compatibility Verified on October 12, 2026 Model listed by the manufacturer’s official store. No hands-on test. |
Accessories to verify
| Accessory | Printer variant | Status |
|---|---|---|
| Phaetus Cobweb/POPweb build plate for many printers Flashforge AD5M / AD5X | AD5X | To be verified The seller states “AD5MX”: it is unclear whether this model is included. |
Related guides
General guides help identify print defects. Follow the manual for your exact model and variant for disassembly, maintenance and calibration.
- First layer not sticking: causes and checks
How to recognise a first layer that is too high, too squished or uneven and fix it in order: plate cleaning, slicer profile, leveling, Z offset. Based on official guidance from Bambu Lab, Prusa, Creality, Elegoo and Anycubic.
- Warping: corners lifting off the bed with ABS, ASA, PETG and PLA
Why corners curl and how to reduce it: plate cleaning, drafts, enclosure, bed temperature, brim and ears, cooling and glue. Based on official guidance from Bambu Lab and Prusa and on user experience.
- Clogged nozzle and under-extrusion: find where the blockage is and fix it
How to tell a blockage in the PTFE tube, the extruder or the hotend apart, when to use the needle and cold pull, how to recognise heat creep, and when replacing the nozzle, PTFE tube or gears is actually justified.
- Wet filament: recognise it, dry it and store it
Symptoms of filament that has absorbed moisture, the most sensitive materials, how to dry following Bambu Lab and Prusa official tables without damaging spool or filament, and how to keep it dry.
- Stringing and oozing: how to get rid of filament strings and blobs
How to recognise stringing and oozing, the main causes (wet filament, temperature, retraction, travel moves, nozzle) and the checks to do in order, with official guidance from Prusa, Bambu Lab, Creality and Elegoo.
- Layer shifting: causes and checks in order
Why layers shift along X or Y and how to find the cause: obstructions, collisions with curled parts, belts, pulleys, speed, electronics cooling and motors, with official guidance from Prusa, Bambu Lab, Creality, Elegoo and Anycubic.
- Ringing and ghosting: getting rid of ripples on FDM print walls
What ringing (or ghosting) is, why it appears after corners and lettering, and how to fix it in order: printer surface, loose parts, belts, lubrication, vibration calibration (input shaping), speed and acceleration.
Dates and news
-
Flashforge launches the multi-colour AD5X
Flashforge launched the AD5X, a single-nozzle CoreXY printer with a built-in four-spool system for multi-colour printing. First deliveries were later delayed compared with the initially expected timeline.
Sources: Flashforge AD5X: Faster Multi-color Printing Is Coming (Flashforge)
Official documentation
Manuals and guides published by Flashforge. Links go to the manufacturer’s site; we consulted them on the date shown.
- Support page
-
- Support hub page (Flashforge Wiki) — English, accessed on October 5, 2026
- User manual
-
- User manual (PDF EN/CN) — multiple languages, accessed on October 5, 2026
- Online manual (index) — English, accessed on October 5, 2026
- Quick start guide
-
- Quick start guide (PDF EN/CN) — multiple languages, accessed on October 5, 2026
- Maintenance
-
- Maintenance and spare part replacement index — English, accessed on October 5, 2026
- Unclogging the nozzle with cold pull — English, accessed on October 5, 2026
- Troubleshooting
-
- Hardware troubleshooting — English, accessed on October 5, 2026
- Usage troubleshooting (extrusion, adhesion, IFS) — English, accessed on October 5, 2026
- Print quality troubleshooting — English, accessed on October 5, 2026
- Error code list — English, accessed on October 5, 2026
- Frequently asked questions (FAQ) — English, accessed on October 5, 2026
- Parts replacement
-
- Nozzle assembly replacement — English, accessed on October 5, 2026
- XY belt adjustment and replacement — English, accessed on October 5, 2026
- Firmware and software
-
- Firmware update (OTA and IFS) — English, accessed on October 5, 2026
- Firmware release notes — English, accessed on October 5, 2026
- Download center (manuals, quick start guides, firmware) — multiple languages, accessed on October 5, 2026
- Safety
-
- Safety warnings and environmental requirements — English, accessed on October 5, 2026
- Technical specifications
-
- Official documentation — English, accessed on October 5, 2026
Sources
- AD5X — official documentation — Flashforge, accessed on October 5, 2026