Browser storage is unavailable: your choices will not be saved on this device.
You are offline: you are viewing the pages saved on this device.
Flashforge
Flashforge Adventurer 5M
FDM filament printer. Build volume: 220 × 220 × 220 mm. CoreXY kinematics, open frame.
Assessed from documentation Updated on October 4, 2026
How to recognize it: Check the full model name “Adventurer 5M” on the label or in device information. Suffixes and revisions identify different models; check the source before selecting parts.
Technical specifications
Manufacturer specifications for the listed configuration. Notes identify accessories, measurement conditions and calculated values.
Technology and structure3
| Technology | FDM |
|---|---|
| Kinematics | CoreXY |
| Build area shape | Rectangular |
Build area and volume4
| Build area X | 220 mm |
|---|---|
| Build area Y | 220 mm |
| Build area Z | 220 mm |
| Build volume | 10.648 L Calculated from nominal X × Y × Z dimensions. |
Hardware6
| Enclosed as standard | No |
|---|---|
| Installed toolheads / extruders | 1 |
| Extruder type | Direct drive |
| Standard nozzle | 0.4 mm |
| Available nozzle diameters | 0.25, 0.4, 0.6, 0.8 mm |
| Build plate | Removable flexible PEI steel |
Temperatures2
| Maximum hotend temperature | 280 °C |
|---|---|
| Maximum bed temperature | 100 °C |
Speed and performance2
| Maximum travel speed | 600 mm/s |
|---|---|
| Maximum acceleration | 20,000 mm/s² |
Features2
| Filament runout sensor | Yes |
|---|---|
| Power loss recovery | Yes |
Connectivity3
| Control display diagonal | 4.3 in |
|---|---|
| Connectivity | Wi-Fi, Ethernet, USB |
| Listed slicers | FlashPrint 5, Orca-Flashforge, OrcaSlicer |
Materials1
| Manufacturer-listed materials | PLA, PETG, TPU, PLA-CF, PETG-CF For TPU and reinforced materials check the official 0.6/0.8 mm nozzle conditions. |
|---|
Dimensions and weight3
| Machine width | 363 mm Dimensions exclude spool holder; 5M also excludes display. |
|---|---|
| Machine depth | 376 mm |
| Machine height | 413 mm |
Power2
| Rated power | 350 W |
|---|---|
| Power supply | 100–120 / 200–240 V AC, 50/60 Hz |
Technical sources: Adventurer 5M — documentazione ufficiale
Undocumented specifications (24)
- Shared dual-nozzle area X: Not documented
- Shared dual-nozzle area Y: Not documented
- Shared dual-nozzle area Z: Not documented
- Filament diameter: Not documented
- Nozzle material: Not documented
- Chamber heating: Not documented
- Maximum chamber temperature: Not documented
- Advertised maximum print speed: Not documented
- Advertised typical print speed: Not documented
- Maximum volumetric flow: Not documented
- Minimum layer thickness: Not documented
- Maximum layer thickness: Not documented
- Multicolor system: Not documented
- Colors with documented configuration: Not documented
- Automatic leveling: Not documented
- Camera: Not documented
- Air filtration: Not documented
- Control display: Not documented
- Firmware: Not documented
- Internal storage: Not documented
- Net weight: Not documented
- Advertised noise: Not documented
- Leveling method: Not documented
- Advertised Z accuracy: Not documented
No published compatibility for this printer.
Accessories with verified compatibility
| Accessory | Printer variant | Status |
|---|---|---|
| Flashforge original nozzle assembly for Adventurer 5M Adventurer 5M / 5M Pro | Adventurer 5M | Verified compatibility Verified on October 12, 2026 Model listed by the manufacturer’s official store. No hands-on test. |
| Flashforge original nozzles for Adventurer 5M Adventurer 5M / 5M Pro | Adventurer 5M | Verified compatibility Verified on October 12, 2026 Model listed by the manufacturer’s official store. No hands-on test. |
| Flashforge original PEI plate for Adventurer 5M Adventurer 5M / 5M Pro | Adventurer 5M | Verified compatibility Verified on October 12, 2026 Model listed by the manufacturer’s official store. No hands-on test. |
Accessories to verify
| Accessory | Printer variant | Status |
|---|---|---|
| Phaetus Cobweb/POPweb build plate for many printers Flashforge AD5M / AD5X | Adventurer 5M | To be verified The seller states “AD5MX”: it is unclear whether this model is included. |
Related guides
General guides help identify print defects. Follow the manual for your exact model and variant for disassembly, maintenance and calibration.
- First layer not sticking: causes and checks
How to recognise a first layer that is too high, too squished or uneven and fix it in order: plate cleaning, slicer profile, leveling, Z offset. Based on official guidance from Bambu Lab, Prusa, Creality, Elegoo and Anycubic.
- Warping: corners lifting off the bed with ABS, ASA, PETG and PLA
Why corners curl and how to reduce it: plate cleaning, drafts, enclosure, bed temperature, brim and ears, cooling and glue. Based on official guidance from Bambu Lab and Prusa and on user experience.
- Clogged nozzle and under-extrusion: find where the blockage is and fix it
How to tell a blockage in the PTFE tube, the extruder or the hotend apart, when to use the needle and cold pull, how to recognise heat creep, and when replacing the nozzle, PTFE tube or gears is actually justified.
- Wet filament: recognise it, dry it and store it
Symptoms of filament that has absorbed moisture, the most sensitive materials, how to dry following Bambu Lab and Prusa official tables without damaging spool or filament, and how to keep it dry.
- Stringing and oozing: how to get rid of filament strings and blobs
How to recognise stringing and oozing, the main causes (wet filament, temperature, retraction, travel moves, nozzle) and the checks to do in order, with official guidance from Prusa, Bambu Lab, Creality and Elegoo.
- Layer shifting: causes and checks in order
Why layers shift along X or Y and how to find the cause: obstructions, collisions with curled parts, belts, pulleys, speed, electronics cooling and motors, with official guidance from Prusa, Bambu Lab, Creality, Elegoo and Anycubic.
- Ringing and ghosting: getting rid of ripples on FDM print walls
What ringing (or ghosting) is, why it appears after corners and lettering, and how to fix it in order: printer surface, loose parts, belts, lubrication, vibration calibration (input shaping), speed and acceleration.
Official documentation
Manuals and guides published by Flashforge. Links go to the manufacturer’s site; we consulted them on the date shown.
- Support page
-
- Support wiki hub (Adventurer 5M series) — English, accessed on October 5, 2026
- Support guide — English, accessed on October 5, 2026
- User manual
-
- User manual (PDF) — multiple languages, accessed on October 5, 2026
- User manual, latest revision (PDF) — multiple languages, accessed on October 5, 2026
- Quick start guide
-
- Quick start guide (PDF) — multiple languages, accessed on October 5, 2026
- Maintenance
-
- Adventurer 5M Pro, Adventurer 5M — maintenance and spare parts replacement guides index — English, accessed on October 5, 2026
- Adventurer 5M Pro, Adventurer 5M — linear rail maintenance — English, accessed on October 5, 2026
- Troubleshooting
-
- Adventurer 5M Pro, Adventurer 5M — FAQ and troubleshooting — English, accessed on October 5, 2026
- Adventurer 5M Pro, Adventurer 5M — print quality issues — English, accessed on October 5, 2026
- Adventurer 5M Pro, Adventurer 5M — error code list — English, accessed on October 5, 2026
- Hardware troubleshooting — English, accessed on October 5, 2026
- Usage troubleshooting — English, accessed on October 5, 2026
- Parts replacement
-
- Adventurer 5M Pro, Adventurer 5M — nozzle replacement — English, accessed on October 5, 2026
- Adventurer 5M Pro, Adventurer 5M — XY belt adjustment and replacement — English, accessed on October 5, 2026
- Heated bed and cable replacement — English, accessed on October 5, 2026
- Firmware and software
-
- Download center (manuals, firmware, software) — multiple languages, accessed on October 5, 2026
- Firmware update — English, accessed on October 5, 2026
- Technical specifications
-
- Official documentation — English, accessed on October 5, 2026
Sources
- Adventurer 5M — official documentation — Flashforge, accessed on October 5, 2026