Phaetus quick-swap nozzle kit for Creality K2, K2 Pro and K2 Plus

All-metal quick-swap nozzle for the Creality K2 series, with a silicon carbide tip or Endcoat coating, in 0.4 or 0.6 mm.

Nozzles Assessed from documentation Updated on October 20, 2026

Phaetus quick-swap nozzle kit for Creality K2, K2 Pro and K2 Plus (1/3)

Phaetus quick-swap nozzle kit for Creality K2, K2 Pro and K2 Plus (2/3)

Phaetus quick-swap nozzle kit for Creality K2, K2 Pro and K2 Plus (3/3)

Image: Phaetus Official Store (AliExpress) — AliExpress Affiliate Program · Sources

How to choose the variant

Choose “For K2 HI Series”, then the tip type (silicon carbide or Endcoat) and the diameter (0.4 or 0.6 mm). Set the same diameter in the slicer.

Check price and availability on AliExpress

Affiliate link: we may earn a commission. Your price does not change.

Delivery country

Availability and shipping depend on the delivery country: check them on AliExpress.

Compatibility by printer

Printer	Variant	Status
Creality K2 K2	Creality K2 / K2 Pro / K2 Plus	Compatibility declared by the seller Assessed from documentation Verified on October 20, 2026 Model listed by the seller for this version. No hands-on test.
Creality K2 Plus K2 Plus	Creality K2 / K2 Pro / K2 Plus	Compatibility declared by the seller Assessed from documentation Verified on October 20, 2026 Model listed by the seller for this version. No hands-on test.
Creality K2 Pro K2 Pro	Creality K2 / K2 Pro / K2 Plus	Compatibility declared by the seller Assessed from documentation Verified on October 20, 2026 Model listed by the seller for this version. No hands-on test.

What you need to install it

Check model and version on the seller page
Replace the nozzle when the hotend is cold, following the procedure in the manual
Set the diameter of the fitted nozzle in the slicer

Why it was selected

Sold by the official Phaetus store on AliExpress, whose listing names the Creality K2 series. Silicon carbide is a very hard material, used for nozzles intended for abrasive filaments.

Limitations

This is not an original part from the printer manufacturer.
Compatibility declared by the seller: no hands-on test.
The printer manufacturer does not list it among its original parts: check that your hotend is the K2 series quick-swap type.

Available variants

Creality K2 / K2 Pro / K2 Plus

Sources

Phaetus Silicon Carbide For Creality K2 Plus Pro HI Nozzle Quick-Swap Nozzle Kit All Metal Design For Creality K2 3D Printer — Phaetus Official Store (AliExpress), accessed on October 20, 2026