Browser storage is unavailable: your choices will not be saved on this device.
You are offline: you are viewing the pages saved on this device.
Creality
Creality K2 Plus
FDM filament printer. Build volume: 350 × 350 × 350 mm.
Assessed from documentation Updated on October 4, 2026
How to recognize it: Check the full model name “K2 Plus” on the label or in device information. Suffixes and revisions identify different models; check the source before selecting parts.
Technical specifications
Manufacturer specifications for the listed configuration. Notes identify accessories, measurement conditions and calculated values.
Technology and structure3
| Technology | FDM |
|---|---|
| Kinematics | CoreXY |
| Build area shape | Rectangular |
Build area and volume4
| Build area X | 350 mm |
|---|---|
| Build area Y | 350 mm |
| Build area Z | 350 mm |
| Build volume | 42.875 L Calculated from nominal X × Y × Z dimensions. |
Hardware2
| Enclosed as standard | Yes |
|---|---|
| Extruder type | Direct drive |
Temperatures4
| Maximum hotend temperature | 350 °C |
|---|---|
| Maximum bed temperature | 120 °C |
| Chamber heating | Active |
| Maximum chamber temperature | 60 °C |
Speed and performance3
| Advertised maximum print speed | 600 mm/s |
|---|---|
| Advertised typical print speed | 300 mm/s |
| Maximum acceleration | 30,000 mm/s² |
Features3
| Automatic leveling | Yes |
|---|---|
| Filament runout sensor | Yes |
| Camera | Built in |
Connectivity2
| Control display diagonal | 4.3 in |
|---|---|
| Internal storage | 32 GB |
Dimensions and weight4
| Machine width | 495 mm |
|---|---|
| Machine depth | 515 mm |
| Machine height | 640 mm |
| Net weight | 35 kg |
Technical sources: K2 — documentazione ufficiale · K2, K2 Plus — pagina prodotto serie K2 e specifiche
Undocumented specifications (27)
- Shared dual-nozzle area X: Not documented
- Shared dual-nozzle area Y: Not documented
- Shared dual-nozzle area Z: Not documented
- Installed toolheads / extruders: Not documented
- Filament diameter: Not documented
- Standard nozzle: Not documented
- Available nozzle diameters: Not documented
- Nozzle material: Not documented
- Build plate: Not documented
- Maximum travel speed: Not documented
- Maximum volumetric flow: Not documented
- Minimum layer thickness: Not documented
- Maximum layer thickness: Not documented
- Multicolor system: Not documented
- Colors with documented configuration: Not documented
- Power loss recovery: Not documented
- Air filtration: Not documented
- Control display: Not documented
- Connectivity: Not documented
- Listed slicers: Not documented
- Firmware: Not documented
- Manufacturer-listed materials: Not documented
- Rated power: Not documented
- Power supply: Not documented
- Advertised noise: Not documented
- Leveling method: Not documented
- Advertised Z accuracy: Not documented
No published compatibility for this printer.
Related guides
General guides help identify print defects. Follow the manual for your exact model and variant for disassembly, maintenance and calibration.
- First layer not sticking: causes and checks
How to recognise a first layer that is too high, too squished or uneven and fix it in order: plate cleaning, slicer profile, leveling, Z offset. Based on official guidance from Bambu Lab, Prusa, Creality, Elegoo and Anycubic.
- Warping: corners lifting off the bed with ABS, ASA, PETG and PLA
Why corners curl and how to reduce it: plate cleaning, drafts, enclosure, bed temperature, brim and ears, cooling and glue. Based on official guidance from Bambu Lab and Prusa and on user experience.
- Clogged nozzle and under-extrusion: find where the blockage is and fix it
How to tell a blockage in the PTFE tube, the extruder or the hotend apart, when to use the needle and cold pull, how to recognise heat creep, and when replacing the nozzle, PTFE tube or gears is actually justified.
- Wet filament: recognise it, dry it and store it
Symptoms of filament that has absorbed moisture, the most sensitive materials, how to dry following Bambu Lab and Prusa official tables without damaging spool or filament, and how to keep it dry.
- Stringing and oozing: how to get rid of filament strings and blobs
How to recognise stringing and oozing, the main causes (wet filament, temperature, retraction, travel moves, nozzle) and the checks to do in order, with official guidance from Prusa, Bambu Lab, Creality and Elegoo.
- Layer shifting: causes and checks in order
Why layers shift along X or Y and how to find the cause: obstructions, collisions with curled parts, belts, pulleys, speed, electronics cooling and motors, with official guidance from Prusa, Bambu Lab, Creality, Elegoo and Anycubic.
- Ringing and ghosting: getting rid of ripples on FDM print walls
What ringing (or ghosting) is, why it appears after corners and lettering, and how to fix it in order: printer surface, loose parts, belts, lubrication, vibration calibration (input shaping), speed and acceleration.
Dates and news
-
Creality opens K2 Plus Combo with CFS pre-sale
Creality started a phased pre-sale of the K2 Plus with the CFS multi-colour system on its official store, with decreasing discounts until 20 July 2024. The stated list price after the pre-sale was US$1,499.
Sources: Creality announces pre-sale of the K2 Plus x CFS Combo (Creality)
Official documentation
Manuals and guides published by Creality. Links go to the manufacturer’s site; we consulted them on the date shown.
- Support page
-
- Support wiki hub page — English, accessed on October 5, 2026
- User manual
-
- User manual — English, accessed on October 5, 2026
- User manual in multiple languages (PDF, Italian included) — multiple languages, accessed on October 5, 2026
- Maintenance
-
- Routine maintenance tips — English, accessed on October 5, 2026
- Idler pulley lubrication (noise) — English, accessed on October 5, 2026
- Z-axis lead screw cleaning — English, accessed on October 5, 2026
- XY belt tensioning — English, accessed on October 5, 2026
- Troubleshooting
-
- Troubleshooting: jammed filament — English, accessed on October 5, 2026
- Troubleshooting: filament blob on the hotend — English, accessed on October 5, 2026
- Troubleshooting: poor bed adhesion — English, accessed on October 5, 2026
- Troubleshooting: over-squished first layer — English, accessed on October 5, 2026
- Parts replacement
-
- Nozzle replacement — English, accessed on October 5, 2026
- Hotend replacement — English, accessed on October 5, 2026
- Filament cutter replacement — English, accessed on October 5, 2026
- Nozzle wiper and adhesive tape replacement — English, accessed on October 5, 2026
- PTFE tube replacement — English, accessed on October 5, 2026
- Spare parts list — English, accessed on October 5, 2026
- Firmware and software
-
- Firmware update guide (printer and CFS) — English, accessed on October 5, 2026
- Firmware download (printer and CFS) — English, accessed on October 5, 2026
- Technical specifications
-
- K2, K2 Plus — K2 series product page and specifications — English, accessed on October 5, 2026
Sources
- K2, K2 Plus — K2 series product page and specifications — Creality, accessed on October 5, 2026
- K2 — official documentation — Creality, accessed on October 4, 2026