Browser storage is unavailable: your choices will not be saved on this device.
You are offline: you are viewing the pages saved on this device.
Prusa Research
Prusa Research CORE One+ Gen2
FDM filament printer. Build volume: 250 × 220 × 270 mm. CoreXY kinematics.
Assessed from documentation Updated on October 4, 2026
How to recognize it: Check the full model name “CORE One+ Gen2” on the label or in device information. Suffixes and revisions identify different models; check the source before selecting parts.
Technical specifications
Manufacturer specifications for the listed configuration. Notes identify accessories, measurement conditions and calculated values.
Technology and structure2
| Technology | FDM |
|---|---|
| Build area shape | Rectangular |
Build area and volume4
| Build area X | 250 mm |
|---|---|
| Build area Y | 220 mm |
| Build area Z | 270 mm |
| Build volume | 14.85 L Calculated from nominal X × Y × Z dimensions. |
Hardware2
| Enclosed as standard | Yes |
|---|---|
| Filament diameter | 1.75 mm |
Temperatures3
| Maximum hotend temperature | 290 °C |
|---|---|
| Maximum bed temperature | 120 °C |
| Maximum chamber temperature | 55 °C |
Resolution2
| Minimum layer thickness | 0.05 mm |
|---|---|
| Maximum layer thickness | 0.3 mm |
Dimensions and weight4
| Machine width | 415 mm |
|---|---|
| Machine depth | 444 mm |
| Machine height | 555 mm |
| Net weight | 22.5 kg |
Technical sources: CORE One+ Gen2 — documentazione ufficiale
Undocumented specifications (35)
- Kinematics: Not documented
- Shared dual-nozzle area X: Not documented
- Shared dual-nozzle area Y: Not documented
- Shared dual-nozzle area Z: Not documented
- Installed toolheads / extruders: Not documented
- Extruder type: Not documented
- Standard nozzle: Not documented
- Available nozzle diameters: Not documented
- Nozzle material: Not documented
- Build plate: Not documented
- Chamber heating: Not documented
- Advertised maximum print speed: Not documented
- Advertised typical print speed: Not documented
- Maximum travel speed: Not documented
- Maximum acceleration: Not documented
- Maximum volumetric flow: Not documented
- Multicolor system: Not documented
- Colors with documented configuration: Not documented
- Automatic leveling: Not documented
- Filament runout sensor: Not documented
- Power loss recovery: Not documented
- Camera: Not documented
- Air filtration: Not documented
- Control display diagonal: Not documented
- Control display: Not documented
- Connectivity: Not documented
- Listed slicers: Not documented
- Firmware: Not documented
- Internal storage: Not documented
- Manufacturer-listed materials: Not documented
- Rated power: Not documented
- Power supply: Not documented
- Advertised noise: Not documented
- Leveling method: Not documented
- Advertised Z accuracy: Not documented
No published compatibility for this printer.
Accessories with verified compatibility
| Accessory | Printer variant | Status |
|---|---|---|
| eSUN eBOX Pro filament dryer eBOX Pro | CORE One+ Gen2 | Compatibility declared by the seller Verified on October 12, 2026 1.75 mm filament documented by the printer manufacturer; the dryer does not connect to the printer. No hands-on test. |
| eSUN vacuum storage bag kit for filament eSUN Storage Bag Kit | CORE One+ Gen2 | Compatibility declared by the seller Verified on October 12, 2026 1.75 mm filament documented by the printer manufacturer; the accessory does not connect to the printer. No hands-on test. |
| SUNLU S2 filament dryer SUNLU S2 | CORE One+ Gen2 | Compatibility declared by the seller Verified on October 12, 2026 1.75 mm filament documented by the printer manufacturer; the accessory does not connect to the printer. No hands-on test. |
| SUNLU S4 four-spool filament dryer SUNLU S4 | CORE One+ Gen2 | Compatibility declared by the seller Verified on October 12, 2026 1.75 mm filament documented by the printer manufacturer; the accessory does not connect to the printer. No hands-on test. |
Related guides
General guides help identify print defects. Follow the manual for your exact model and variant for disassembly, maintenance and calibration.
- First layer not sticking: causes and checks
How to recognise a first layer that is too high, too squished or uneven and fix it in order: plate cleaning, slicer profile, leveling, Z offset. Based on official guidance from Bambu Lab, Prusa, Creality, Elegoo and Anycubic.
- Warping: corners lifting off the bed with ABS, ASA, PETG and PLA
Why corners curl and how to reduce it: plate cleaning, drafts, enclosure, bed temperature, brim and ears, cooling and glue. Based on official guidance from Bambu Lab and Prusa and on user experience.
- Clogged nozzle and under-extrusion: find where the blockage is and fix it
How to tell a blockage in the PTFE tube, the extruder or the hotend apart, when to use the needle and cold pull, how to recognise heat creep, and when replacing the nozzle, PTFE tube or gears is actually justified.
- Wet filament: recognise it, dry it and store it
Symptoms of filament that has absorbed moisture, the most sensitive materials, how to dry following Bambu Lab and Prusa official tables without damaging spool or filament, and how to keep it dry.
- Stringing and oozing: how to get rid of filament strings and blobs
How to recognise stringing and oozing, the main causes (wet filament, temperature, retraction, travel moves, nozzle) and the checks to do in order, with official guidance from Prusa, Bambu Lab, Creality and Elegoo.
- Layer shifting: causes and checks in order
Why layers shift along X or Y and how to find the cause: obstructions, collisions with curled parts, belts, pulleys, speed, electronics cooling and motors, with official guidance from Prusa, Bambu Lab, Creality, Elegoo and Anycubic.
- Ringing and ghosting: getting rid of ripples on FDM print walls
What ringing (or ghosting) is, why it appears after corners and lettering, and how to fix it in order: printer surface, loose parts, belts, lubrication, vibration calibration (input shaping), speed and acceleration.
Dates and news
-
Prusa refreshes its lineup: CORE One+ Gen 2, CORE One L+ and XL+
Prusa Research introduced the CORE One+ (Gen 2), CORE One L+ and XL+ with GT1.5 belts, an integrated nozzle wiper and improved cooling, at unchanged prices. Assembled CORE One+ Gen 2 and CORE One L+ shipped immediately, the XL+ from late August; upgrade kits are planned for owners.
Affected printers: Prusa Research CORE One+ Gen2, Prusa Research CORE One L+, Prusa Research Original Prusa XL+
Sources: Better prints, easier use: Prusa XL, CORE One L and CORE One Gen 2 – our big product update (Prusa Research)
Official documentation
Manuals and guides published by Prusa Research. Links go to the manufacturer’s site; we consulted them on the date shown.
- Support page
-
- Support hub (Prusa Knowledge Base) — English, accessed on October 5, 2026
- User manual
-
- CORE One+ — user manual (3D Printing Handbook 1.02) — English, accessed on October 5, 2026
- Quick start guide
-
- Quick start guide: unboxing and first startup — English, accessed on October 5, 2026
- Assembly
-
- Kit assembly guide — English, accessed on October 5, 2026
- Upgrade guide from CORE One+ to Gen 2 — English, accessed on October 5, 2026
- Conversion kit guide — English, accessed on October 5, 2026
- Maintenance
-
- Periodic maintenance — English, accessed on October 5, 2026
- CORE One+ Gen2, CORE One L+ — belt tension adjustment — English, accessed on October 5, 2026
- Troubleshooting
-
- Prusa Research, 4 models — clogged nozzle — English, accessed on October 5, 2026
- Selftest errors (troubleshooting) — English, accessed on October 5, 2026
- Parts replacement
-
- Prusa Nozzle replacement — English, accessed on October 5, 2026
- CORE One+ Gen2, XL — nozzle change or replacement (overview) — English, accessed on October 5, 2026
- Firmware and software
-
- Prusa Research, 8 models — how to update the firmware — English, accessed on October 5, 2026
- Firmware and downloads — English, accessed on October 5, 2026
- Technical specifications
-
- Official documentation — English, accessed on October 5, 2026
Sources
- CORE One+ Gen2 — official documentation — Prusa Research, accessed on October 5, 2026